Laminating the middle layer

Second layer of veneer

Firstly, the exact position of the new veneer strips is marked with nails.

Staples

After the resin has dried, our boat builders pull out the staples with the help of the synthtic strips, and then attach another layer of epoxy resin.

Pressure

The layers are then pressed down using clamps so that each layer of mahogany adheres optimally.

First layer

That is a yacht after the first layer is fixed.

After each veneer layer has been laminated, the hull is completely planed and sanded.

Second layer

And this is a yacht after the second layer is fixed.

With the eye, with auxiliary laths and with the hand, each little bump is evened out, otherwise they would intensify with each layer.
Some places are even filled with a special filler in order to achieve the ideal hydrodynamic form.