Turning over the hull

Turning over the hull - finishing stage

Firstly, the hull has to be set down again for a short while.

Setting down the hull

Before we can transport the hull back into the hall with our special vehicle, the hull is carefully placed down on matresses so that the cranes can be cleared away.

Quite high

Even when the hull is sitting flat on the ground, it is still impressively high.

Moving the hull

Finally, the hull is moved back into the hall.

In the case of very long yachts, this is a very time-consuming process.

View of the bow

Here, you can see the special reinforcements on the hull for attaching the shroud.

The hull is positioned vertically straight in the block, so that work on the inside can continue.